There are 16 questions to be attended in 20 minutes. The questions are on Electrical Engineering. Read the study material before making an attempt so that you build your confidence in the subject. This is the tenth of the series of 10 questions paper that will appear before the RRB examination for SSE and JE to be held in Dec.
Time limit: 0
Quiz-summary
0 of 16 questions completed
Questions:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Information
There are 16 questions to be attended in 20 minutes. The questions are on Electrical Engineering. Read the study material before making an attempt so that you build your confidence in the subject. This is the first of the series of 10 questions paper that will appear before the RRB examination for SSE and JE to be held in Dec.
You have already completed the quiz before. Hence you can not start it again.
Quiz is loading...
You must sign in or sign up to start the quiz.
You have to finish following quiz, to start this quiz:
Results
0 of 16 questions answered correctly
Your time:
Time has elapsed
You have reached 0 of 0 points, (0)
Average score
Your score
Categories
Not categorized0%
The Answer Key:
Sr No
Question
Answer
Remarks
1
Diamagnetic materials are those which repels when magnetic field is applied and this material is a diamagnetic material
Hg
2
Kirchhoff’s current law states that
algebraic sum of current at node is zero
3
In an AC system, the reactive power
keeps moving from source to load at rated frequency
4
Three resistances of three ohms each are connected to form a triangle. What is the resistance between two corners
2
It will form a parallel circuit of 6 ohms and 3 ohms.
5
Time constant of a capacitor is defined as the time taken during which the voltage across the capacitor rises to what percentage of its final value
0.632
6
During charging and discharging process of a nickel iron cell
water is neither formed nor absorbed
7
In a AC circuit, resistive and total impedance are 10 and 20 ohms respectively. What is the phase angle difference between the voltage and current?
60 degree
Cosɸ= R/Z; where R= 10 ohms and Z= 20 ohms than Cosɸ=1/2 means phase angle is 60 degree
8
Maximum starting torque is achieved when rotor resistance is equal
rotor reactance
9
Overhead traction voltage of Electric traction is
single Phase 25kV
Current collection at 3 phase is very difficult and 25 kv is standardised for the purpose of suitability of clearances.
10
Voltage regulation in a distribution network is of the order of
Plus/Minus 10 %
11
In 25 kV electric traction, the return current flows through
on of the two rails
One of the rail is used to return the current to traction substation. The other rail is used for track circuiting and if both the rails are used than different frequency is used for the purpose.
12
Following process does not uses dielectric heating
infrared heating
13
The material used for high temperature resistive heating is
silicone carbide
14
an auto-transformer is used where
variable voltage is required generally for experiments
Auto-transformer is having one primary winding and secondary moves on the primary to tap the required voltage.
15
Differential protection works on the principle of
assess the difference of current in two related circuit and difference is assessed to trip the circuit breaker
Mostly used for the protection of transformer wherein difference between primary and secondary is assessed and circuit breaker is tripped. This is done after taking into consideration the transformer ratio.
16
Transducer is a device which converts
any form of energy into another form of energy
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Answered
Review
Question 1 of 16
1. Question
an auto-transformer is used where
Question 2 of 16
2. Question
Diamagnetic materials are those which repels when magnetic field is applied and this material is a diamagnetic material
Question 3 of 16
3. Question
Kirchhoff’s current law states that
Question 4 of 16
4. Question
In an AC system, the reactive power
Question 5 of 16
5. Question
Three resistances of three ohms each are connected to form a triangle. What is the resistance between two corners
Question 6 of 16
6. Question
Time constant of a capacitor is defined as the time taken during which the voltage across the capacitor rises to what percentage of its final value
Question 7 of 16
7. Question
During charging and discharging process of a nickel iron cell
Question 8 of 16
8. Question
In a AC circuit, resistive and total impedance are 10 and 20 ohms respectively. What is the phase angle difference between the voltage and current?
Question 9 of 16
9. Question
Maximum starting torque is achieved when rotor resistance is equal
Question 10 of 16
10. Question
Overhead traction voltage of Electric traction is
Question 11 of 16
11. Question
Voltage regulation in a distribution network is of the order of
Question 12 of 16
12. Question
In 25 kV electric traction, the return current flows through
Question 13 of 16
13. Question
Following process does not uses dielectric heating
Question 14 of 16
14. Question
The material used for high temperature resistive heating is
Very supportable
sir, can you please post some mock tests on basics of civil and mechanical engineering,that would be very helpful.Thanks!
good questions
Very nicely explained
Objective question for 3phase loco in loco inspector examination