There are 16 questions to be attended in 20 minutes. The questions are on Electrical Engineering. Read the study material before making an attempt so that you build your confidence in the subject. This is the fourth of the series of 10 questions paper that will appear before the RRB examination for SSE and JE to be held in Dec.
Time limit: 0
Quiz-summary
0 of 16 questions completed
Questions:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Information
There are 16 questions to be attended in 20 minutes. The questions are on Electrical Engineering. Read the study material before making an attempt so that you build your confidence in the subject. This is the first of the series of 10 questions paper that will appear before the RRB examination for SSE and JE to be held in Dec.
You have already completed the quiz before. Hence you can not start it again.
Quiz is loading...
You must sign in or sign up to start the quiz.
You have to finish following quiz, to start this quiz:
Results
0 of 16 questions answered correctly
Your time:
Time has elapsed
You have reached 0 of 0 points, (0)
Average score
Your score
Categories
Not categorized0%
The Answer Key:
Sr No
Question
Answer
Remarks
1
Ampere-second is the unit of
Charge
I=Q/t; I*t=Q i.e. ampere-sec is the unit of charge
2
Resistivity of this material is least as compared to others
Silver
3
The impedance offered by an inductor of inductance L at frequency f is given by
2πf*L
4
Thermo-couple works on the principle of
Any junction of dissimilar metals will have its resistance change in proportion to the change in temperature
5
How much energy is required to raise a lift with load of 5 tonne through a distance of 30 meter assuming 25% losses in motor and gear mechanism. Assume g=10 m/sec²
0.5 units
Work done by the lift = Wh = mgh = 5*1000*10*36 = 1.8×10⁶ J; 1kWh = 1000x(J/sec)*3600 = 36×10⁵; From this we get 1.8×10⁶/36×10⁵ = 0.5 kWh
6
The capacity of battery reduces with
reduce in temperature
7
What current will flow through a source having an impedance of 28/-32° and applied with a voltage source of 140/20°?
5/52°
Simple property of division in polar form where denominator angle is subtracted from numerator angle and magnitude is divisible as normal
8
An induction motor running at a slip of s, will deliver power at shaft in reference to air gap power given is given by a formula
(1-s²)Pg
sPg will be the rotor losses and balance will be shaft power
9
Corona discharge in high voltage transmission life is the effect of
electro static discharge
10
What is the approximate ratio of crossectional area of Aluminium and Copper Cable for the same current carrying capacity
1.6
11
A mercury vapour lamp emits light which appears to human eyes
bluish
12
IGBT stands for
insulated gate bio-polar transistor
13
The protection against lightening on transmission line is provided by
ground wire running on top of transmission line
ground wire running on top of transmission line and Surge arresters are used for the protection of transmission lines from lightening
14
No load current of a transformer is equal to
vector sum of iron loss current and magnetizing current
There are two portion of current for losses which active and another reactive to magnetizing field which is the main current lagging with the voltage.
15
Why one of the pin of a three pin plug is longer than other two?
Earth terminal of the plug should connect the socket earth first
The question is for a longer terminal and necessity is for eath to make first connection. In case there is a fault in the appliance, the same will first get earthed.
16
Two resistance of 3 ohms and R ohms are connected in series with a voltage source of 14 V. What is the value of R if the power loss across R is 16W
4
The current flowing is 14/(3+R); 16= 14*14*R/(3+R)² and by solving we get R=4,9/4
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Answered
Review
Question 1 of 16
1. Question
Ampere-second is the unit of
Question 2 of 16
2. Question
Resistivity of this material is least as compared to others
Question 3 of 16
3. Question
The impedance offered by an inductor of inductance L at frequency f is given by
Question 4 of 16
4. Question
Thermo-couple works on the principle of
Question 5 of 16
5. Question
How much energy is required to raise a lift with load of 5 tonne through a distance of 30 meter assuming 25% losses in motor and gear mechanism. Assume g=10 m/sec_
Question 6 of 16
6. Question
The capacity of battery reduces with
Question 7 of 16
7. Question
What current will flow through a source having an impedance of 28/-32 degree and applied with a voltage source of 140/20degree?
Question 8 of 16
8. Question
An induction motor running at a slip of s, will deliver power at shaft in reference to air gap power given is given by a formula
Question 9 of 16
9. Question
Corona discharge in high voltage transmission life is the effect of
Question 10 of 16
10. Question
What is the approximate ratio of crossectional area of Aluminium and Copper Cable for the same current carrying capacity
Question 11 of 16
11. Question
A mercury vapour lamp emits light which appears to human eyes
Question 12 of 16
12. Question
IGBT stands for
Question 13 of 16
13. Question
The protection against lightening on transmission line is provided by
Question 14 of 16
14. Question
No load current of a transformer is equal to
Question 15 of 16
15. Question
Why one of the pin of a three pin plug is longer than other two?
Question 16 of 16
16. Question
Two resistance of 3 ohms and R ohms are connected in series with a voltage source of 14 V. What is the value of R if the power loss across R is 16W